What is the size of VAZ windshield wiper blades

Choosing the right size windshield wiper blades for any car is very important. Because the inappropriate size of the brushes will interfere with the driver, as the glass will not be cleaned well. If we install too large windshield wiper blades on the car window, they will climb onto the rubber of the glass or the edge of the blade will touch the edge of the door. If you install brushes on glass that are smaller than necessary, they will not clean enough of the glass. And in the middle there may be a strip of dirt untouched by the brushes, which they did not reach. This strip of dirt will obstruct the driver's view and reduce his visibility of the road.

Rear wiper size of VAZ 2109

The size of the windshield wiper blades on VAZ 2108, 2109, 21099, 2110, 2111 and 2112
cars. All the models indicated in the title of this section of the article are cars produced by the AvtoVAZ automobile concern, and are the progenitors of the Lada Samara series. It is for this reason that their front wipers are symmetrical, just like those of their descendants, and have a length of 53 centimeters

. Purchased: art. 705210 Windshield wiper blade 21″/53 cm frame CLASSIC SKYBEAR for 90 RUR/piece

Sale of frameless and hybrid wipers for Lada (VAZ) 2109 1 (1987-2006). Find out how much they cost and how to buy windshield wiper blades for Lada (VAZ) 2109 1 (1987-2006). Size and price of windshield wipers for Lada (VAZ) 2109 1 (1987-2006). Selection of wipers for Lada (VAZ) 2109 1 (1987-2006) by year - price, photos, reviews

The main functional task of windshield wiper blades is to ensure systematic and effective cleaning of the windshield and rear window of the car from snow, rain, and various contaminants. Their obvious advantage is the ability to take into account the curvature of the windshield shape and the compactness of the mount itself.

Wipers of almost all brands of cars of the VAZ family, including wipers on the VAZ 2114, have several operating modes. The windshield wiper operates in four modes:

• intermittent, with a short pause;
• first speed (slow);
• second speed (accelerated);
• cleaning with washer.

The rear wiper operates in two modes:

• cleaning without washer;
• simultaneous cleaning with washer.

Windshield wiper VAZ

Today, finding and choosing wipers for VAZ or Lada cars to suit your taste and budget is not at all difficult. The market offers windshield wiper blades from well-known brands, such as Bosch, Champion, Denso, SWF, Trico, Valeo, HORS, and a wide range of blades from Chinese manufacturers, varying in price and quality. VAZ windshield wipers are supplied in special sets of two pieces, for specific car models, or in individual packages of one piece, and all that remains is to choose the size. We recommend installing brushes whose size corresponds to that recommended by the car manufacturer , however, on the Internet there are often reviews of drivers who have installed non-standard size brushes.
In any store you can easily pick up both classic frame models of blades and new items - frameless and hybrid wipers.

Depending on the car model, several types of VAZ windshield wipers . Brushes differ both in size and in the type of attachment to the leash.

Dimensions and type of fastening of windshield wiper blades for VAZ and Lada cars.

Find out the type of fastening

To install new wipers, you need to know how to attach them to the arm. The most common is a hook . It is used on most domestic and foreign cars, for example, on VAZ models starting from the tenth generation. The same wipers are used on Hyndai, Kia, Toyota, Daewoo, etc. It is important to remember that the hook size may vary. You can remove the windshield wiper and measure it. The most popular sizes: 9x3 and 9x4 mm. Another type of fastening is a pin lock , found, for example, on classics.

Foreign cars have more varied fastenings, because large concerns are trying to make most of the spare parts unique. Here are some of them:

• button – found on Volvo, Renault, Ford, Citroen, VW;
• side pin - present in car models starting from 2005: VW Jetta and Passat, BMW 3, some Peugeot, Volvo, Mercedes models;
• side clamp - found mainly in European models Audi, Fiat, Saab, Opel;
• bayonet lock - found on Renault models since 2004, as well as on Saab models.

These and other mounting options are shown in the images.

Types of wiper mounts

Many manufacturers of car windshield wipers include several fasteners in the kit so that the buyer does not have problems with installation. For example, one set of wipers will fit both Polo sedan and Kalina.

Windshield wipers (wiper blades) for Lada (VAZ) 2108, 2109, 21099, 2114, 2115 since 1985

Our online store offers to buy wipers from the best manufacturers for Lada (VAZ) 2108, 2109, 21099, 2114, 2115 . We select wipers according to original catalogs from manufacturing companies. This completely eliminates the possibility of error when choosing wipers. The wipers that you buy in our online store will definitely fit Lada (VAZ) 2108, 2109, 21099, 2114, 2115.

When choosing wipers for Lada (VAZ) 2108, 2109, 21099, 2114, 2115, pay attention to the following characteristics:

• price;
• fastening type;
• quality of wipers;

The average service life of car wipers is from six months to a year. Manufacturers recommend regularly replacing windshield wiper blades, since plastic-rubber products change their properties over time and may not cope with their main task - providing an excellent view of the road for the driver.

We try to make it as easy as possible for you to buy wipers and save your time! When purchasing wipers in our store, you receive fast delivery. Our store employees will provide you with professional advice over the phone and help you make the best choice of wipers for your Lada (VAZ) 2108, 2109, 21099, 2114, 2115.

Correct selection of wipers by size for VAZ 2114

To avoid unwanted problems during vehicle operation, experts recommend annual maintenance and, if necessary, replacing the brushes on the VAZ 2114 with ones compatible with the specific brand of car.

Factory symmetrical VAZ 2114 auto wipers have a standard length on each side of the windshield - 51 cm.

But it is possible to supply brushes of other sizes:

• driver's side – 53 cm;
• and on the passenger side - 51 cm.

But if you install 53 cm brushes on both sides, water flows in a thin stream in the middle of the windshield.

On the rear window of this model, the blade size is 30 cm, although some car enthusiasts install 33 cm and this does not create any additional problems. Installing a rear wiper 40 cm long will require expanding the stroke limit. But to ensure that the windshield wiper does not go too low, and also does not run into the glass seals: the motor is removed, then put back, with the obligatory displacement of a couple of teeth.

Dimensions

The dimensions of the windshield wiper blades are determined by the manufacturer. You won't be able to find original ones for sale. But it won’t be difficult to find high-quality analogues in car stores. It is important to be careful: you need to give preference to manufacturers who have proven themselves well. There are a lot of counterfeit products on sale today. Ordinary fakes. Most often the latter are found - imitating well-known brands.

It's not that difficult to spot a fake. It is important to pay attention to many details. If the packaging is of poor quality, there is damage on it: most likely the buyer is looking at a fake. You need to measure the length of the brushes in advance. This will avoid mistakes.

Original articles

It will be impossible to purchase original brushes. Since AvtoVAZ has long ago stopped producing such parts on its own. Large volumes are purchased from well-known manufacturers. For example, Bosch. Windshield wipers from this company are installed off the assembly line and are sold in their original packaging. It is important to remember: even AvtoVAZ products are counterfeit. You need to be careful when choosing. Poor quality brushes fail faster.

Replacement options

In addition to the original ones, there are many alternatives. Products from various manufacturers are well suited for the VAZ 2114. Since the length and mounting method are universal. Without exception, all presented products can be divided into categories:

• frame;
• frameless;
• hybrid;
• winter.

Frame

The classic design involves a metal frame. Its presence makes the structure more durable. But it is important to remember: it creates an obstacle to the passage of air around the car body. under the influence of the oncoming flow, the brush simply comes off a short distance from the windshield. Which worsens contact with the surface being cleaned. The advantage of frame brushes is their low cost.

Frameless

This variety does not have the disadvantages of brushes equipped with a frame. It has a presentable appearance and good aerodynamics. The oncoming air flow easily passes through the brush. Doesn't linger. Thanks to this, even at speeds of more than 140 km/h, contact with the surface being cleaned is not lost. Moreover, the cost of the part is relatively low. It has low strength.

Hybrid

Models of this type combine all the advantages. There are virtually no disadvantages. The brush itself is made from a single piece of rubber. But at the same time there is a metal structure inside it. Making the brush quite stiff. The shape of the wiper is aerodynamic, air easily flows around it. This allows you to avoid problems at high speed. Contact of surfaces (cleaned and cleaning) does not deteriorate.

Winter

Winter wipers are distinguished by their elasticity - even at sub-zero temperatures they clean the glass well. The secret of this property lies in the addition of rubber to the composition. It has the ability to retain its qualities in any conditions. Regardless of the temperature around. These brushes are suitable for those operating in the Far North:

When purchasing, it is important to focus on a number of factors:

• maximum driving speed (if more than 100 km/h, it is necessary to use brushes with an aerodynamic shape);
• weather conditions (if it’s constantly negative, you can’t do without winter brushes).

What kind of windshield wiper should be on a VAZ-2114

VAZ 2113, 2114 and 2115 cars have factory windshield wipers with a length of 51 cm. If replacement is necessary, you can use wipers whose length is 53 cm. In this case, you must leave a standard size blade on the passenger side. It is noteworthy that these cars also have rear wipers of the following sizes:

1. They are generally 30 cm long (11-12 in inches).
2. It is possible to replace it with 33 cm.
3. Products 40 cm long are also suitable, but for this you will need to move several teeth on the electric motor brush.

It should be noted that all cars from the AvtoVAZ plant are the progenitors of the Lada Samara, therefore they have symmetrical washers, like their descendants, and their average length is 53 cm.

Brush sizes

• according to the technical manual, the size of the driver's wiper is 600 mm;
• The size of the passenger cleaner is 410 mm.

Alternatively, you can use longer windshield wipers:

1. On the passenger side, you can install a longer wiper, its size should be no more than 450 mm, this will allow it to engage a larger amount of surface.
2. As for the driver's brush, it is better not to experiment here. For example, if you install a 610 mm wiper, this will cause it to touch the car body during operation, and accordingly, a knock will appear (video author - TheLadaKalina 2).

Via relay

The idea is that the general electrical circuit of the windshield wipers is equipped with an additional relay. This allows you to noticeably speed up the work of the brushes.

However, in this case, only two wiper operation modes will remain available:

• intermittent;
• accelerated constant.

The new relay is installed at the break in the existing connector. An additional block is purchased for it - the wires to it come from the mounting block and then follow to the windshield wiper motor. You will also need a 5-pin relay and a socket for it.

https://twokarburators.ru/ne-rabotayut-dvorniki-2108-2109/https://mashinapro.ru/273-dvorniki-na-vaz-2109.htmlhttps://vaz-2114-lada.ru/2014/ 01/kakojj-razmer-shhjotok-stekloochistitelya-dvornikov-vaz/https://zapchasti.expert/shhetki-stekloochistitelya/dvorniki-dlya-vaz-2109.htmlhttps://ladaautos.ru/vaz-2109/kak-mozhno- sdelat-dvorniki-bystree-na-vaz-2109.html

Device design

Wiper circuit
First, let's try to understand how the wiper circuit on the VAZ 2110 works and what components form a solid unit called a windshield wiper.

Front windshield wiper motor for VAZ 2109, VAZ 2108

• Description
• Characteristics
• Video
• Reviews 0 ? '(' + product.reviewsCount +')' : »>>

Dear customers, in order to avoid errors when sending a windshield wiper gear motor, please indicate your car model and year of manufacture in the “Comment” line.

The windshield wiper drive motor is most often replaced by the following terms: wiper motor, wiper motor (electric motor), gear motor drive, wiper motor, wiper gear motor, windshield wiper. Therefore, if you hear these terms, then know that we are talking about the same thing.

The electric motor of the wiper mechanism is designed to drive the windshield wiper arm system. The electric motor is installed in a niche under the windshield and is connected by a shaft to the windshield wiper lever system. Power supply and control of the operating modes of the electric motor are carried out using a standard connector. The motor and gearbox are made in a closed housing with protection from dust and atmospheric moisture entering the electrical parts and mechanisms of the electric motor.

The windshield wiper consists of a gear motor, levers and brushes. The electric motor of the cleaner is three-brush, excited by permanent magnets. To protect against overloads, a thermobimetallic fuse is installed in it, and capacitors and chokes are installed to reduce radio interference.

Technical characteristics of the windshield wiper gearmotor 2108-3730000 : - Rated voltage 12 V;

— Rated power 10 W;

— Maximum current 3.5 A 5.0 A;

— Rated rotation speed 30-40 min -1 55-70 min -1.

Windshield wiper: 1 — rear armature shaft bushing; 2 — felt ring; 3 — electric motor housing; 4 - permanent magnet; 5 - anchor; 6 - collector; 7 — traverse with brush holders, chokes and thermobimetallic fuses; 8 — front armature shaft bushing; 9 — panel with noise-suppressing capacitors and limit switch contacts; 10 — block of intermediate gears; 11 - cover; 12 — gear housing; 13 — driven gear; 14 — output shaft of the gearmotor; 15 — block of intermediate gears.

The windshield wiper motor has three operating modes, they are activated by the right steering column switch. Intermittent mode is provided by a K2 type electronic relay installed in the mounting block. This relay also turns on the wiper motor at low speed when the windshield washer is turned on.

When the gearmotor operates at low speed in constant mode, the supply voltage is supplied to diametrically opposed brushes. When the gear motor operates at maximum speed, “+” power is supplied to the brush located on the side. To unload the contacts of the ignition switch, the electric motor is connected through an additional relay KB in the mounting block.

Other articles of the product and its analogues in catalogs: 2108-523612.016, 171.3730, 21083730000, CA 136-5205-200.

VAZ 2108, VAZ 2109-099, AZLK 2141, IZH -2126, GAZ-24, GAZ 3102, GAZ 31029.

Any breakdown is not the end of the world, but a completely solvable problem!

What are the causes of problems with the gearmotor (electric motor) of the wipers in a VAZ family car.

How to independently replace the gearmotor (electric motor) of a windshield wiper on a VAZ family car.

AvtoAzbuka online store, repair costs will be minimal.

Just COMPARE and BE SURE.

Don't forget to share the information you find with your friends and acquaintances, because they may also need it - just click one of the social networking buttons located above.

What happens if you choose the wrong brush size?

Large brushes

If you select brushes a little larger than required, then the pressing force of the brushes on the glass (especially frameless ones) drops significantly, which contributes to poor cleaning of the glass. Why are wipers poorly cleaned?

Also, during operation, larger brushes can climb onto the edge of the windshield sealing rubber during operation, thereby breaking away from the working surface.

Well, they have another problem that occurs on Kalinas, the brush on the driver’s side hits the edge of the driver’s door.

Small brushes

If the brushes are selected lower than required, then the main disadvantage is the reduction in the working surface area.

Also, due to small brushes, a dirty patch or “snot” of accumulated water may form in the middle of the windshield (during rain).

Modern auto wipers VAZ 2114

Leading manufacturers especially recommend modern frameless brushes VAZ 2114 to car enthusiasts.

Their advantageous feature:

• more dense, uniform pressure to the glass;
• less restriction of field of view for the driver;
• high-quality cleansing without streaks in both directions;
• no noise from air flow.

Helpful advice. Of great importance for the safe movement of the VAZ 2114 is the exact match of the brush sizes required by the manufacturer for the corresponding type of car. This is especially important in snowy winter, when the outline of the road is practically invisible.

Although frameless wipers have a slightly shorter service life, they are considered the best, and therefore cost a little more.

A very important factor in safety and comfort while driving a car is the removal of dirt and water from rain from the rear window. The rear wiper of the VAZ 2114, with a speed regulator, which is located inside the car, turning in both directions, copes with its functional tasks perfectly.

Brush sizes for VAZ 2114, 2113 and 2115:

On these models, both brushes have the same dimensions and their length is 510 mm. But, it is allowed to install brushes on the passenger side with a size of 510 mm, and opposite the driver with a size of 530 mm. Why different sizes? It’s just that if you put large ones of the same size, this will lead to the fact that a watery strip may appear on the glass when they work together. The rear viewing window is also equipped with wipers that use 300 mm blades. Here the dimensions are not so critical and can be easily replaced with 330 mm.

vote

Article rating

Dimensions for different models

For the VAZ 2109, 21099, 2108 models, the size of the VAZ 2114 windshield wiper blades is suitable - these models have the same body and the same glass. The length of the VAZ 2114 windshield wiper blades is also suitable for the VAZ 2110, 2111, 2112 models. For the Lada Kalina, the optimal sizes are the following: rear blade - 36 cm, passenger blade - 40 cm, driver's blade - 60 cm. The size of the patios on the Priora is the same as for VAZ 2114: rear wiper - 33 cm, passenger - from 48 to 51, driver - 53 cm. Cars of the Grant model require almost the same size of wiper blades as Kalina. These dimensions are as follows: the passenger wiper is from 40 to 41 cm, and the driver’s wiper is 60 centimeters.