Maintenance schedule for Lada Priora

Check for traces of short circuits and visible damage to the wire insulation
Check the functionality of the electrical equipment components: generator, lighting, light and sound alarms, heater, control devices, glass and headlight cleaners, heated rear window and front seats, washers, headlight range control, electric windows and exterior mirrors

Check the condition and tension of the generator drive belt

Replace the alternator drive belt

Clean and lubricate the battery terminals and clamps

Check the level and density of the electrolyte in the battery

Clean the generator slip rings, check the wear and fit of the brushes

Clean the starter commutator, clean and lubricate the starter drive parts, check the wear and fit of the brushes

MZ order 401

Download to-5 Lada Priora list of works doc

The schedule of all maintenance work is given in accordance with the service book. Yes, in general, it’s a simple job) it’s not in order, is draining the transmission fluid on the Priora too much of a problem?) or as with the engine - unscrew it and drain it yourself? To maintain the vehicle warranty, maintenance of the Lada Priora must be performed only at specialized dealerships. Priora Maintenance Regulations.

What kind of work is carried out according to the technical regulations of the Priora Priora, depending on the mileage, then the 5th maintenance schedule! The cost of maintenance work for Priora (VAZ). Maintenance in compliance with the work schedule established by the automaker is the key to long-term trouble-free operation of your car.

Communities › Lada Priora Club › Blog › Is it worth going to TO-2? 5doors4wheels last online 18 hours ago. Of course, I still have a fair amount of mileage to go, but because I have nothing else to do, I decided to estimate) Is it worth it?

What changes to TO-2? Yes, in general, it’s a simple job) I don’t know, is draining the transmission fluid on a Priora a big problem?) or as with the engine - unscrew it and drain it yourself?

7 y. BAALEX. in the service book, look at the list of works. In general, if there is an opportunity to rewind the mileage, that’s THAT. If so, you’ll go to repairs))). 7 y. 5doors4wheels. Lada Priora operation and repair. practical guide. Search. Periodic maintenance. Maintenance operations performed after every km of the vehicle.

Published by admin. Add a comment. Be sure to carry out all the work listed above at the appropriate mileage. For engine 1.6i cl. check the condition of the timing belt, tension and guide rollers - check and replace. Category: 7. Periodic maintenance | Add a comment. Maintenance operations performed after every 75 km of vehicle mileage.

Published by admin. Add a comment. In fact, Priora is the result of a deep restyling of the “ten”, since it inherited many components and parts from VAZ. At the same time, a number of unique innovations and original solutions allow us to confidently talk about a completely new version.

The stylish Priora features an elegant exterior and compliance with modern safety standards. Specific terms and scope of maintenance can be specified in the LADA Priora maintenance regulations. Name of works. Mileage (km) or duration of operation (months). Routine maintenance of Lada Priora () in Moscow. Return to the list of services. we recommend.

Range of services. new Bestseller. Routine maintenance (basic package). 1 hour rub. 1 rub. Range of services. new Routine maintenance (standard package). 2 hours 25 minutes 2 rub. 4 rub. Periodic maintenance.

Be sure to carry out all the work listed above at the appropriate mileage. For engine 1.6i cl. check the condition of the timing belt, tension and guide rollers - check and replace. Be sure to carry out all the work listed above at the appropriate mileage. For engine 1.6i 8-cl. Replace the timing belt.

Maintenance schedule for Lada Priora

For Priora, the frequency of maintenance is assumed by the manufacturer to be a multiple of 15 thousand kilometers.

3153045607590105
Engine
Make sure there are no extraneous noises or engine knocks+++++++
Check the coolant level in the reservoir++++++
Check the cooling system for leaks++++++++
Check the tightness of the power supply system (fuel)++++++++
Tighten the engine mounts++
Check the condition of the timing belt and the alignment of the marks+
Replace timing belt+
Replace the oil filter, engine oil and check the oil level++++++++
Replace coolant*+
Replace the engine air filter+++
Replace spark plugs+++
Replace the fuel filter+++
Replace the oxygen concentration sensor+
Check exhaust emissions++++++++
Make sure there are no errors in the electronic engine control system (ECM)++++++++
Transmission
Make sure there are no extraneous noises or knocks in the gearbox, clutch and front wheel drives++++++++
Check the gearbox control drives and the smoothness of gear shifting++++++++
Check the gearbox oil level++++++
Check the tightness of the gearbox++++
Check the condition of the wheel drives and the condition of the jet thrust+++++++
Tighten the transmission mounts+++++++
Change the gearbox oil*+
Chassis
Check the condition of the front and rear suspension elements, the condition of the rubber-metal hinges and covers of the suspension elements+++++++
Tighten the front and rear suspension mounts++++++++
Check and adjust front wheel alignment++++
Balance the wheels and rearrange them according to the recommended scheme+++
Steering
Check that the steering column is securely fastened++++++++
Check the condition of the steering rod joints; their protective caps and the condition of the steering rack covers +++++++
Check the serviceability of the EPS (electromechanical power steering)++++++++
Check the steering rack play+++++++
Brake system
Check the level of brake fluid in the reservoir, as well as the serviceability of the warning lamp in the instrument panel indicating a lack of fluid+++++
Check the tightness of the hydraulic brake connections, as well as the condition of the hoses and tubes++++++++
Check the condition of the front brake pads+++++++
Check the condition of the covers and lubrication of the front wheel brake guide pins++++++++
Check the condition of the rear brake pads+++
Check the tightness of the brake wheel cylinders++++
Check the handbrake adjustment++++
Replace brake fluid**++
Check the operation of the vacuum brake booster++
Check the functionality of the rear wheel brake pressure regulator+++
Check the braking efficiency of the front and rear wheels++++++++
Electrical equipment
Check for traces of short circuits and visible damage to the wire insulation++++++++
Check the functionality of the electrical equipment: generator, interior lighting, light and sound alarms, stove, control devices, glass and headlight cleaners, heated rear window and front seats, washers, headlight range control, electric windows and exterior mirrors++++++++
Check the condition and tension of the generator drive belt+++++++
Replace the alternator drive belt+
Clean and lubricate battery terminals and clamps+++
Check battery charge+++++++
Clean the generator slip rings, check the wear and fit of the brushes+
Clean the starter commutator, clean and lubricate the starter drive parts, check the wear and fit of the brushes++
Check the boundaries of the headlight beams+++
Body
Check the body for chips, cracks, corrosion+++++++
Check the functionality of the door locks, hood, trunk lid, as well as seat and seat belt mechanisms++++++++
Replace the cabin air filter+++++++
Clean the drainage holes in doors and thresholds+++++++
Lubricate the rubbing areas of the door limiters, the hinges and springs of the fuel tank hatch, the keyholes of the doors and the trunk lid.+++

* Or in 5 years, whichever comes first.

** Or after 3 years, whichever comes first.

*** Refill if necessary.

When the vehicle's mileage is more than 105 thousand km, maintenance procedures should be carried out at the frequency indicated in the table.

To Lada Priora list of works

Check for any unusual knocks or engine noises
Check the coolant level

Check the tightness of the cooling system, as well as the condition of the hoses and their connections

Check the tightness of the power system, the condition of the hoses and their connections

Tighten the engine mounts

Check the condition of the timing belt and the alignment of the marks on the automatic tensioner

Replace timing belt

Replace the oil filter, oil in the engine crankcase and check the oil level

Replace coolant*

Replace the air filter element

Replace spark plugs

Replace the fine fuel filter

Replace the oxygen concentration sensor

Check the toxicity of exhaust gases, if the requirements do not meet, eliminate the cause of the malfunction

Check the functionality of the electronic engine management system using the CHECK ENGINE warning light and the absence of fault codes in the controller memory

Check for any extraneous knocks or noises in the gearbox, clutch and front wheel drives

Check the gearbox control drives and the smoothness of gear shifting

Check the gearbox oil level

Check the tightness of the gearbox

Check the condition of the wheel drives and the condition of the jet thrust

Tighten the transmission mounts

Change the gearbox oil*

Check the absence of signs of deformation, the condition of the front and rear suspension elements, the condition of the rubber-metal hinges and covers of the suspension elements

Tighten the front and rear suspension mounts

Check and adjust the front wheel alignment angles

Check the condition of the rims and tires of the wheels, balance the wheels and rearrange them according to the recommended scheme (see Fig. 4.1)

Check that the steering column is securely fastened

Check the condition of the steering rod joints; their protective caps and the condition of the steering gear covers

Check the serviceability of the electromechanical power steering

Check steering play

Check the brake fluid level and the functionality of the low fluid alarm

Check the tightness of the hydraulic brake connections, as well as the condition of the hoses and tubes

Check the condition of the front brake pads

Check the condition of the covers and lubrication of the front wheel brake guide pins

Check the condition of the rear brake pads

Check the tightness of the brake wheel cylinders

Check the parking brake system adjustment

Replace brake fluid**

Check the operation of the vacuum brake booster

Check the functionality of the rear wheel brake pressure regulator

Check the braking efficiency of the front and rear wheels

Check for traces of short circuits and visible damage to the wire insulation

Check the functionality of the electrical equipment components: generator, lighting, light and sound alarms, heater, control devices, glass and headlight cleaners, heated rear window and front seats, washers, headlight range control, electric windows and exterior mirrors

Check the condition and tension of the generator drive belt

Replace the alternator drive belt

Clean and lubricate the battery terminals and clamps

Check the level and density of the electrolyte in the battery

Clean the generator slip rings, check the wear and fit of the brushes

see also

Resetting the service interval

    18 1 92k

Running in a new car

    3 0 6k

Scheduled maintenance

    28 0 32k

Running in Xinkai HXK 6491, HXK6490 and HXK1021

    2 0 4k

Vehicle temperature dependence

    6 0 38k

Routine maintenance work for VAZ Priora with 1.6 liter, eight-valve and sixteen-valve engines. The schedule of all maintenance work is given in accordance with the service book. The prices of replacement parts for each maintenance are also indicated (in US dollars at the date of writing). Prices are for Moscow. Prices for oil and liquids are not given due to the many differences between different manufacturers. The cost of work is shown in the range of offers from Moscow service stations. It is also necessary to keep in mind that, under severe operating conditions, it is recommended to change the engine oil with filter every 10,000 km.

Work and checks during all maintenance

  1. Replace the oil filter and engine oil. Oil with specification according to API SM, SN is used. The viscosity of the oil is selected depending on the region of operation. Oil volume 3.5 l. Oil filter number 21080-1012005-09. The cost of the original filter is from $0.89 to $1.22. Prices for works range from $7.08 to $18.
  2. Tighten the transmission mounts.
  3. Tighten the fastenings in the rear and front suspension.
  4. Check the absence of knocking in the engine, the level of exhaust toxicity, the operation of the ECU and the absence of errors.
  5. Check for knocking noises in the gearbox, clutch and wheel drives. As well as gearbox control drives and gear shifting.
  6. Check the tightness and condition of the brake system and the effectiveness of the brakes on all wheels.
  7. Check the steering column fastening and the serviceability of the EUR.

leopold5807 › Blog › Do-it-yourself routine maintenance of Lada Priora

Routine maintenance work on VAZ Priora with 1.6 liter, sixteen-valve engines. The schedule of all maintenance work is given in accordance with the service book. The prices of replacement parts for each maintenance are also indicated (in US dollars at the date of writing). Prices are for Moscow. Prices for oil and liquids are not given due to the many differences between different manufacturers. The cost of work is shown in the range of offers from Moscow service stations. It is also necessary to keep in mind that, under severe operating conditions, it is recommended to change the engine oil with filter every 10,000 km.

Priora maintenance schedule

Work and checks for all maintenance Replace the oil filter and engine oil. Oil with specification according to API SM, SN is used. The viscosity of the oil is selected depending on the region of operation. Oil volume 3.5 l. Oil filter number 21080-1012005-09. The cost of the original filter is from $0.89 to $1.22. Prices for works range from $7.08 to $18. Tighten the transmission mounts. Tighten the fastenings in the rear and front suspension. Check the absence of knocking in the engine, the level of exhaust toxicity, the operation of the ECU and the absence of errors. Check for knocking noises in the gearbox, clutch and wheel drives. As well as gearbox control drives and gear shifting. Check the tightness and condition of the brake system and the effectiveness of the brakes on all wheels. Check the steering column fastening and the serviceability of the EUR. Work during maintenance 1 (mileage 2500 - 3000 km)

Work and checks during all maintenance. During the first maintenance, check the tightness of the cooling system; tightness and integrity of the power system; exhaust toxicity level; gearbox tightness; checking and adjusting the angles of the front wheels; tightness and condition of the brake system; condition of the anthers and lubrication of the front wheel brake guide pins; adjusting the handbrake; List of works during maintenance 2 (mileage 14,500 - 15,000 km or 1 year)

Work and checks during all maintenance. Checking the coolant level during the second maintenance; gearbox oil level; condition of wheel drives and jet thrust; condition of the front and rear suspensions; brake fluid level and level indicator; the condition of the steering rods and boots of the steering mechanism, as well as the play of the steering wheel; wear of the front brake pads. List of works during maintenance 3 (mileage 29,500 - 30,000 km or 2 years)

Work and checks during all maintenance. Replacing spark plugs. Code 21120370701000. Prices 0.76$ - 1.35$. Replacing the fuel filter. Part code 21230-1117010-02. Price from $4.60 to $19.57. Replacing the air filter. Code 21120-1109080-06. Cost from $3.36. Checking the coolant level during the third maintenance; gearbox oil level; gearbox tightness; condition of wheel drives and jet thrust; condition of the front and rear suspensions; checking and adjusting the angles of the front wheels; condition of tires, wheel rims, their balancing, and also rearranged according to the diagram; the condition of the steering rods and boots of the steering mechanism, as well as the play of the steering wheel; brake fluid level and level indicator; wear of the front brake pads; wear of rear brake pads; tightness of the working brake cylinders and adjustment of the handbrake; performance of the “sorcerer”. List of works during maintenance 4 (mileage 44,500 - 45,000 km or 3 years)

Work and checks during all maintenance. Replacing the timing belt. 16-valve belt 21126-1006040-00, prices $11.16 - $32.82. Price for work starts from $15. Replacing brake fluid. The fluid used is DOT-3 or DOT-4. System volume 0.45 l. Cost of work starts from $5. Checks during the fourth maintenance All maintenance checks 2. Check the vacuum brake booster. List of works during maintenance 5 (mileage 59,500 - 60,000 km or 4 years)

Work and checks during all maintenance. All maintenance checks 3. List of works during maintenance 6 (mileage 74,500 - 75,000 km or 5 years)

Work and checks during all maintenance. Tighten the engine fastenings. Replace coolant. Volume 7.84 l. The cost of work is from $10.5. Replace the oxygen sensor. Part code 21123850010. Prices $29.57 - $35.07. Change the oil in the gearbox. API GL-4 group. Volume 3.1 l. The cost of work starts from $5. During the sixth maintenance, check the condition of the wheel drives and jet thrust; condition of the front and rear suspensions; the condition of the steering rods and boots of the steering mechanism, as well as the play of the steering wheel; brake fluid level and level indicator; wear of the front brake pads; List of works during maintenance 7 (mileage 89,500 - 90,000 km or 6 years)

Work and checks during all maintenance. Replace brake fluid. Checks during the seventh maintenance all maintenance checks 3; check the vacuum brake booster. List of works during maintenance 8 (mileage 104,500 - 105,000 km or 7 years)

Work and checks during all maintenance. Checks during the eighth maintenance all maintenance checks 6; coolant level; gearbox oil level; How much does Lada Priora maintenance cost?

The cost of basic diagnostics during the next maintenance is about 3,000 rubles ($45.4). Checking the condition and levels of liquids up to 1000 rubles. (

$15). Let's add the cost of oil (minimum $7.11 for 4 liters), filter on average $1 and replacement cost from $7, we get

$60. At the third maintenance, fuel, air and spark plug filters are added to the amount of the first in the amount of about $16 (along with the cost of replacing them). The amount of the third one is already about $66. The fourth maintenance can cost $57. And the most expensive sixth maintenance, plus

List of works during maintenance 3 (mileage 29,500 - 30,000 km or 2 years)

  1. Work and checks during all maintenance.
  2. Replacing spark plugs. Code 21120370701000. Prices 0.76$ - 1.35$.
  3. Replacing the fuel filter. Part code 21230-1117010-02. Price from $4.60 to $19.57.
  4. Replacing the air filter. Code 21120-1109080-06. Cost from $3.36.

Checks during the third maintenance

  • coolant level;
  • gearbox oil level;
  • gearbox tightness;
  • condition of wheel drives and jet thrust;
  • condition of the front and rear suspensions;
  • checking and adjusting the angles of the front wheels;
  • condition of tires, wheel rims, their balancing, and also rearranged according to the diagram;
  • the condition of the steering rods and boots of the steering mechanism, as well as the play of the steering wheel;
  • brake fluid level and level indicator;
  • wear of the front brake pads;
  • wear of rear brake pads;
  • tightness of the working brake cylinders and adjustment of the handbrake;
  • performance of the “sorcerer”.

List of works during maintenance 6 (mileage 74,500 - 75,000 km or 5 years)

  1. Work and checks during all maintenance.
  2. Tighten the engine fastenings.
  3. Replace coolant. Volume 7.84 l. The cost of work is from $10.5.
  4. Replace the oxygen sensor. Part code 21123850010. Prices $29.57 - $35.07.
  5. Change the oil in the gearbox. API GL-4 group. Volume 3.1 l. The cost of work starts from $5.

Checks during the sixth maintenance

  • condition of wheel drives and jet thrust;
  • condition of the front and rear suspensions;
  • the condition of the steering rods and boots of the steering mechanism, as well as the play of the steering wheel;
  • brake fluid level and level indicator;
  • wear of the front brake pads;

List of works during maintenance 4 (mileage 44,500 - 45,000 km or 3 years)

  1. Work and checks during all maintenance.
  2. Replacing the timing belt. 16-valve belt 21126-1006040-00, prices $11.16 - $32.82. Price for work starts from $15.
  3. Replacing brake fluid. The fluid used is DOT-3 or DOT-4. System volume 0.45 l. Cost of work starts from $5.

Checks during the fourth maintenance

  1. All maintenance checks 2.
  2. Check the vacuum brake booster.

How much does Lada Priora maintenance cost?

The cost of basic diagnostics during the next maintenance is about 3,000 rubles ($45.4). Checking the condition and levels of liquids up to 1000 rubles. (

$15). Let's add the cost of oil (minimum $7.11 for 4 liters), filter on average $1 and replacement cost from $7, we get

$60. At the third maintenance, fuel, air and spark plug filters are added to the amount of the first in the amount of about $16 (along with the cost of replacing them). The amount of the third one is already about $66. The fourth maintenance can cost $57. And the most expensive sixth maintenance, plus

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]