What brake pads are best to put on a VAZ?

One of the most significant systems in a car is undoubtedly the braking system. One of the most important parts of this system are the brake pads. Drivers try to keep them in good condition to avoid accidents on the road. Such devices in VAZ cars are reliable but require frequent maintenance because the speed of the car and its stability on the road directly depend on their condition. So which pads are best to put on a vase?

Among the brake pads there are: ceramic, organic, metal, glued and semi-metallic, riveted.

Ceramic pads.

Ceramic brake pads can be called the best pads for VAZ. Their advantages include:

Quiet robot due to the low iron content that is included in their composition.
Very little friction on the brake discs is the main advantage of ceramic pads, due to which their service life is much longer than others.
This material almost does not emit black dust, which you constantly have to get rid of when it settles on the disks.
They have a wide temperature range from 0 to +700 degrees.

The only negative, which is most likely a note, is that ceramic sports pads can be harmful during everyday use due to strong heat.

Organic brake pads.

What brake pads are best to put on a VAZ?
Organic brakes replaced asbestos-laced brake pads in the 1970s due to health concerns. This type of pad includes only 10-30% metal, while the rest is resin and plant fibers adapted to withstand high temperatures.

The advantages of such pads:

They create good friction without preheating.
Compared to other types, they stand out for their lower price.

The disadvantages include rapid wear and dust, which can obliterate the disc holes.

Metal pads.

Up to 65% of this type of pads are made of metal.

Advantages:

Conducts heat well.
Withstands the harmful effects of high temperatures.
The coefficient of friction in such pads is higher than in others.
They have a long service life.

However, it should be noted that metal pads are more suitable for heavy vehicles. Also, their loud braking may be unpleasant for some drivers. High cost is also included in the list of their disadvantages.

Useful and interesting: Required list of documents to apply for a cash loan secured by a car

Semi-metallic.

What brake pads are best to put on a VAZ?
This type of product is made by mixing different types of metals (copper, steel, etc.). Cast iron, wire, graphite powder and copper, steel wool are also added to it.

Pros:

High-quality heat dissipation.

Semi-metallic brake pads, unfortunately, have much more disadvantages than advantages. These include their rapid wear, the noise they make during braking, and their poor performance in the winter.

Original auto parts

The part itself consists of a metal base and a ceramic or synthetic lining.
Due to increased friction, components must be fire resistant and wear resistant. There are both disc and drum variations of the systems. The pads in both cases differ in shape and method of fastening. As a rule, the drum version is rarely used, and only on the rear wheels. The LADA Sport kit will cost you about 650 rubles. It already has all four parts, you don’t have to buy anything else. They have a width of 8 millimeters and a length of 11 cm. A quiet and high-quality replacement option. Don't forget to check that the article numbers match one of the ones below:

2108-3501080;
21080350180083;
2108-3501800-83.

https://www.youtube.com/watch?v=ytdev

AvtoVAZ itself offers a similar solution. VAZ-2108 brake pads are suitable for most VAZ car models and cost about 480 rubles. In particular, they can be installed on VAZ 211213, VAZ 2121. The set consists of two front and two rear pads.

Check that the items and dimensions on the box are correct. If the barcodes are poorly printed, the box does not match the image in the catalog - most likely, this is a fake.

The best brake pads for VAZ.

In the following list we will try to understand the question of which brake pads are better for a VAZ.

What brake pads are best to put on a VAZ?

DAFMI are pads that are not much more expensive than the original ones, but wear out much slower. It is recommended to use it for a measured and calm ride so as not to worsen the braking distance and last longer. The downside is the possible change in thickness due to strong heating, which can lead to destruction of the pad (price from 1500 to 6000 rubles).
TWR - known for their durability and good braking. It should be noted that this device copes well with high loads and elevated temperatures.
ROSDOT - pads from a domestic manufacturer that are wear-resistant, have good thermal conductivity, low noise and not high cost. They can also stand out due to the absence of harmful substances, which allows them to meet all safety standards.
Fredo, a well-known British brand among drivers, has perfectly adapted the cost of the product in accordance with current realities without loss of quality. They provide durability and effective braking, as well as excellent noise characteristics. A large selection of models ensures that you can choose products for any VAZ model.
ATE – despite the fact that the price of the products is above average, it fully justifies them. Silence in the robot, the use of the latest innovative materials, as well as the use of time-tested recipes, soft braking are not all the properties of the pads from this company. The only downside is that there are a lot of fakes, so the manufacturer recommends buying them only in official or large automobile stores.
Allied Nippon - car enthusiasts will agree that almost all products from the Japanese manufacturer are distinguished by their good quality. This company was no exception and has won international recognition. Most of their models are perfectly optimized for VAZ products. Their production technology is aimed precisely at increasing their wear resistance with an acceptable heat transfer rate.

What brake pads are best to put on a VAZ?

Useful and interesting: Useful and effective Liqui Moly additives that clean, protect and reduce consumption

Communities › VAZ: Repair and Modification › Forum › Which pads should I use?

Which company should I install front brake pads to prevent squeaking on a VAZ 2109?

This is not a weak lottery. I installed Ferodo Target on the factory wheels, they only squeak when the wheels are dirty. Silence after washing.

Ferodo clear pads) But the bitch is expensive))

and which ones? red or green? I read that the red ones wear down the disc more than they erase themselves)

Ferodo clear pads) But the bitch is expensive))

Have you heard any other names besides ferodo? =D

We heard, but this is one of the most affordable and high-quality pads)

The main thing is not to run into a fake... And if your wheels are good, then take red ones)

Yes, there are some ordinary ones there, not great ones)

We installed them on simple wheels for a friend (from the factory), and the chisel also overheated after a while and bent the wheels to hell)

how did it overheat?

Well, slow down at high speed))) and for a long time) then the wheels come in interesting shapes xDD

I used to drive red Ferodos. They didn’t creak or smear.

These will definitely not creak and braking will be much more productive.

It will be useful Engine valve

Yeah, ATE whistles when the brake is low, it gets annoying in traffic jams...

Greetings! I have never noticed a “whistle” effect when using original ATE brake pads. Theoretically, I admit this possibility only in the case of extreme abrasion of dust and dirt of the outlet groove on the linings

Mutually. They cost the original, but sometimes they whistle, not like Ferodo, but they still exist. It only appears when you roll at low speed and slow down a little. Otherwise, good pads, although a little expensive.

During the last two revisions of the brake system, I installed a “sweet” couple: BREMBO MAX+ discs FERODO RACING pads. Braking is excellent. This is so...by the way! Good luck on the roads!

Well, the amphibian is strangling me to install a Brembo))) We ride on stock wheels and standards.

According to Ferodo, about 6 years ago there were excellent pads, but then they got worse. Maybe, of course, we have counterfeits in all stores, I won’t argue, but I don’t feel like checking either))) I ride ATE myself, if I erase them, I’ll buy them again, although maybe I’ll try TRW again.

Here, as they say: The owner is a master!))) I have a complete “minced meat”, so braking efficiency comes first. The inevitability forces us to say so. But for civilian use such “upgrades” are naturally inappropriate...

Agree. The stock one is 2110, but the Priorovsky vacuum cleaner is better than stock, it’s far from sports and not necessary for everyday use.

NIPPON, super braking!

yeah, and you squeak like in a UAZ and they scrape as if they’ve been erased, although it’s new, but that’s how it is for me, I’ve heard about a lot of similar symptoms, but it’s normal to slow down

How to choose brake pads for a VAZ

It is best to select brake pads for a VAZ according to the following criteria:

Brand popularity and reputation. You should carefully study the reviews and ratings of brake pads.
Price-quality ratio.
Popular among drivers.
When purchasing pads in a store, you should check them for defects, as well as for a certificate marked 90R/R90.
Their operating temperature.
Noisy or silent operation, because this criterion is no less important than the others.
Level of abrasiveness.
The presence of a sensor that displays wear.
And of course, due attention should be paid to the material and quality of the product.

Most often, you should not forget about the moment of counterfeits on the market. Today, this is a pressing problem in the market for both auto products and others. In order to buy high-quality brake pads for vases, you should follow a few tips:

The presence of foreign bodies on the lining is not allowed.
Remember and always pay attention to the numbers that determine the operating temperature - the higher it is, the better the braking will be.
A mandatory criterion is the presence of a certification mark, which was mentioned above in the article.
As an indicator of quality and customer care, original products always contain a passport, installation instructions, warranty card and, of course, a certificate.

Choosing good pads for a VAZ will not be difficult if you take into account everything listed above in the article and decide which functions are your priority. Also pay attention to the prices. For domestic manufacturers, they are often lower than for foreign brands; it all depends specifically on your budget.

Which VAZ brake pads are better to choose?

In 2021, there are a large number of companies on the market selling components and consumables for Lada cars. Depending on the car model and the store’s assortment, the choice of brake pads can reach 4-5 varieties. The main division is based on brands and production materials. The list of the best manufacturers includes:

EzATI;
VATI;
MARCON
ROSDOT
STS

These companies have held leading positions in the list of the most popular brands for several years in a row and guarantee high quality products.

Also, some motorists prefer original spare parts. AvtoVAZ brake pads differ from analogues in their moderate cost and optimal efficiency. At the same time, the manufacturer does not recommend the use of serial versions for aggressive use for other purposes. Such actions can overheat the linings, which will cause the brake fluid to boil and cause the module to fail.

Material selection

The material of the brake pads also differs. A large selection of organic, ceramic and semi-metallic mixtures often confuses the motorist, which provokes him to make the wrong choice.

Organic

The modification is the oldest variety. The first pads were made from organic material. The modification is designed to work under moderate loads. Typically, this variety is used on production vehicles for daily use in urban environments. The advantages are moderate cost and sufficient prevalence. Disadvantages include rapid wear and low efficiency at high loads.

Semi-metal

The next subtype is used primarily on modified cars and is intended for more aggressive use under increased loads or high speeds.

Among the advantages of this subtype are stability of operation during overheating and during prolonged braking at high speed. The disadvantages include low prevalence in certain regions and high price.

Ceramics

The next subtype is used in 95% of cases on racing units specially prepared for competitions. Usually, replacing VAZ brake pads with similar ones is carried out in a comprehensive manner. In this case, the entire brake system, without exception, is subject to modification. Pads, discs, calipers, lines and working pistons are changed. If this option is installed on a standard car, the effect will be small and there is a risk of severe wear of the discs.

Users consider high efficiency and durability as advantages. The disadvantages include the need for complex rework, which is fraught with significant financial costs.