Instructions on how to connect the radio control on the steering wheel

Push-button auto audio control

While driving a car, it is not always convenient to use a push-button radio to search for a specific audio recording, radio wave, or to adjust the volume. It is safer to use standard radio control buttons on the steering wheel. This function is installed in car dealerships as an additional feature or as part of a premium kit for new vehicles. The standard devices of a middle-class car (for example, a Chevrolet Lacetti) have limited capabilities.

Sometimes car owners prefer to replace the standard audio system with a new multifunctional one. Then the signal from the buttons on the steering wheel does not reach the installed radio, and the driver has to contact the installation center.

To create a relationship between auto control and audio technology, a steering controller is used, which changes the signal from the button on the steering wheel into a signal for reading by the radio. To connect it, the car has all the necessary wiring. Steering adapters are suitable for almost all radios that have an infrared port and/or mini-jack output.

Modules for multifunction steering wheel:

1. Resistive. The measured resistance values ​​are recorded in the module's memory, resulting in control of the steering buttons above the radio.
2. Supporting CAN buses. This adapter converts only digital signals into those that are received by the installed non-standard audio system.

Model overview

Review of Varta V-DV05D

Car radio with steering wheel controls

Low price car radio. The approximate price is 2.5 thousand rubles. The device will be an excellent choice for cars with a 1 din size. This car radio will allow you to enjoy high-quality sound and convenient controls. Differs in the following technical characteristics:

• Supports almost all known formats;
• There is a Dolby Digital decoder;
• Pal/NTSC color system support;
• Plays CD/DVD/MP3 discs;
• There is an amplifier and equalizer;
• Tuner digital;
• The panel is removable;
• Radio tuner with FM/SW support and auto-search for stations;
• There is Bluetooth and audio input on the front panel;
• The control panel is mounted on the steering wheel and there is also a separate infrared remote control;

Joystick for steering wheel for car radio

• The output power of the device is 4x50 W.

Review Pioneer DEH-1600UB

Car radios with joystick on the steering wheel

A car radio in the low price range, already costing 3.5 thousand rubles. Like the model described above, the Pioneer DEH-1600UB is equipped with a standard size of 1 din. Only, unlike Wart, he also reads flash drives, smartphones, players and other modern media. Special connectors on the front panel (AUX/USB) will allow you to do this without any problems. The device display is monochrome 12-character. It displays the necessary information about the composition being played, including in Cyrillic. In addition, RDS information is also displayed. Many experts called the proprietary Mixtrex EZ technology, which adds original sound effects and turns compositions on various media into one whole in a large DJ set, the feature of this car radio model. You can set the sound quality to your liking. A 5-band graphic equalizer helps make this possible.

Note. In addition, the Pioneer DEH-1600UB car radio has the ability to adjust high and low frequencies using appropriate crossovers and adjust the signal level for various sound sources.

As for the radio tuner, it is digital and is equipped with both manual and automatic search for stations. A unique feature is the ability to record and remember up to 24 stations. Interestingly, the radio reception is so good that you can even receive distant stations and search by type of PTY station. During the longest trip, the Pioneer car radio of this model will give you the opportunity to stay up to date with the latest events.

• Support for modern media;
• CD/MP3/USB playback;
• Support for smartphones and players;
• There is an amplifier and equalizer;
• Digital radio tuner supporting FM/SW. It has an RDS function;
• The panel is removable;
• Remote control on the steering wheel.

Joystick for car radio on steering wheel

Independent connection of the multifunction steering wheel

The service of connecting steering wheel radio controls at auto centers requires certain financial costs and the involvement of experienced specialists with knowledge in the field of auto electrics.

But you can connect the remote control and buttons on the steering wheel yourself. So how to connect steering wheel controls to the radio?

Let's consider the algorithm for reinstalling the radio control on the steering wheel when buying a new radio using the example of a Chevrolet Lacetti car. The work will take 1-1.5 hours with all the steps.

Connecting steering wheel buttons to an aftermarket radio

The standard radio, which is installed by the automaker at the factory, does not always meet the needs of the car owner.
As a rule, this is a very ascetic and low-functional device, and the quality of sound reproduction of factory audio systems is not encouraging.

That is why many car owners sooner or later think about replacing the standard radio with a more versatile, functional and modern device.

However, some inconsistencies may occur during the installation process.

One of the most common problems is incorrect interaction of the aftermarket radio with the control buttons on the steering wheel.

As a result of incorrect installation, the radio may, for example, switch tracks when the driver tries to increase the volume or not respond at all to commands sent from the multifunction steering wheel.

Instructions for reinstalling the standard remote control

1. The radio control panel is removed from the steering wheel by removing the bolts.
2. The connector is removed from it.
3. The remote control is disassembled by unscrewing three screws.
4. Resistors of certain values ​​are soldered onto the remote control board using a soldering iron.
5. The ribs in the control panel cover are trimmed and we assemble it back.
6. One wire from the mini-jack is soldered into the central input, the second into the side one. The wires are insulated with electrical tape.
7. In the car, the connector from the radio is trimmed, stripped, connected to the mini-jack terminals and also insulated.
8. The mini-jack is connected to the radio through a connector in the rear wall of the equipment case.
9. The connector is inserted into the remote control, which is then put back by screwing two bolts.
10. We turn on the radios and check the results to see if the radio control on the steering wheel works.

Wired remote control for Pioneer radios

Using the remote control (see Car radios with steering wheel remote control and their overview) you can easily control the radio. It only has a few buttons:

1. ENTER. By clicking on it, the driver confirms the selected action;
2. "Minus and Plus" are used for sound control;
3. Buttons for switching between tracks, menus, etc.;
4. Acceleration buttons.

Car radio with wired remote control

Note: To understand how the remote control works, it is recommended that you familiarize yourself with the Pioneer radio system.

Instructions for installing the steering wheel remote control with a compatible car radio

1. The glove compartment is removed.
2. The heater cables are disconnected.
3. The beard is removed from the panel.
4. The radio is taken out, from which three wires come out - black, brown-yellow and brown-orange.
5. In the connector from the radio in the left corner (yellow-green chip) there are two wires from the control panel on the steering wheel.
6. Two wires from the remote control and black and brown-yellow wires from the radio are connected.
7. The radio, beard and glove compartment are put in place.

TOP 5 car radio control panels from AliExpress

We present a selection dedicated to music in the car. Sometimes it brings incredible pleasure to drive a car and listen to music.

We connect the smartphone to the car radio, press the “Play” button, and off we go. Sometimes the song gets boring and we switch to the next track, taking our eyes off the road. If you have a standard option installed - control of the car radio on the steering wheel , then you will definitely not take your eyes off the road!

A radio control panel can be considered a useful accessory for the comfort and safety of driving a car you can buy it on Aliexpress if you still don’t have this option.

Installation and connection instructions for Chevrolet steering wheel controls

1. A control panel with a mount and a steering wheel contact group with the ability to connect the remote control itself are purchased.
2. Removing the steering wheel:

• On the right side of the steering wheel, remove the plug for the hole in the screws intended for fastening the airbag module;
• The screws for fixing the block are unscrewed;
• The connector is disconnected and removed from the block;
• Unscrew the two screws securing the airbag module;
• The module is removed;
• The pad holder opens;
• The connector is disconnected and the airbag module is removed;
• The connector from the audio signal is disconnected;
• Use a wrench to loosen the steering wheel nut, then unscrew it completely;
• The steering wheel is removed.

1. The steering group is being installed or replaced.
2. The airbag is removed.
3. In the extended steering group there are three wires installed - for the signal and two for the radio control panel.
4. The wires from the steering wheel group are connected to the wires from the radio (there are also three of them).
5. The remote control, airbag and steering wheel are put in place.
6. Installation and programming of the car radio control adapter on the steering wheel:

• The central panel (beard) is removed;
• The radio is removed;
• The black wire from the yellow-green steering control chip is connected to the black wire of the adapter;
• The blue wire of the yellow-green chip with the green wire from the control module (not with the blue one);
• The red wire of the adapter is connected to the red power wire from the radio;
• To connect to the audio system, use a mini-jack or infrared port;
• The adapter is secured with clamps under the radio;

1. The functionality of the buttons on the steering wheel is checked.
2. The radio is installed and the panel is assembled.
3. Checking programming and connection.

Following all the points of the algorithm, every car enthusiast will be able to install the control panel on the steering wheel with his own hands, reinstall it in connection with the purchase of a compatible audio system, as well as install and connect the radio control on the steering wheel. Thus, the driver will save money and some time.

Instructions - connect the multimedia buttons on the steering wheel to the Pioneer radio

Let's look at the process of connecting Pioneer to the buttons on the steering wheel of a Nissan Tiida.

To work we will need:

• Steering wheel with control buttons. Usually Nissans have it as standard; Brand new radio from Pioneer;
• The ISO adapter, adapter, must be included with the car radio;
• Second ISO adapter. You need to purchase it separately;
• SWI adapter for buttons on the steering wheel which we wrote about above.

1.First of all, we connect the black, green, blue and red wires of the SWI-X1 adapter with the wires on the car’s standard terminal block in accordance with the diagram;

Connection:

• blue wire LINE 1 - STRG SWA
• green wire LINE 2 - STRG SWB
• black wire GROUND - STRG GND
• black wire MASS - to the power supply minus (car body).

VIDEO INSTRUCTIONS » alt=»»>

2.Next, we proceed to programming each button on the multifunction steering wheel.

ATTENTION! Before you begin, make sure that the white wire of the adapter is disconnected from ground.

We begin programming by performing the following steps in the specified sequence:

1. We supply power to the +12 V adapter, one of the LEDs on the case should blink briefly;
2. Connect the white wire to ground (the device will enter learning mode);
3. Press and hold the volume up key on the multifunction steering wheel and wait until the LED lights up;
4. Point the remote control at the adapter and press the volume up button on it (the LED on the adapter body should go out);
5. To assign a second command to the same button, press and hold it until both LEDs light up;
6. Point the remote control at the adapter and press the corresponding button on it (both LEDs on the adapter body should go out);
7. We program all other buttons in the same way;
8. Disconnect the white wire of the adapter from ground and isolate it.

VIDEO REVIEW » alt=»»> The setup is complete.

Steering wheel radio control panel KONNWEI

Price: from 1127.73 rub. (check price and discount)

Seller's reliability: excellent!

Delivery within Russia: free!

Customer reviews:

Review #1: Delivery is long, but this is Russian Post! It was packed well. Everything looks great. The remote control is working, set up in 2 minutes, took longer to connect. Chinese radio. I ordered it together with a frame for the radio, the frame came with one broken mount, but not completely.

Review No. 2: The remote control arrived quickly, connected to the Chinese radio, all functions work, but only when the radio is playing, and when you turn on the flash drive it does not work. Radio waves flip back and forth without problems. Everything is fine.

Review #3: I waited 3 weeks for Zach. Packaging of prostates, but everything survived. Works great. Operating the radio has become much more convenient. Thank you.

Steering wheel radio control panel HoXiao

Price: from 1304.83 rub. (check price and discount)

Seller's reliability: excellent!

Delivery within Russia: free!

Customer reviews:

Review #1: The buttons are clear, they work to the last penny. For those with glitches, place the antenna wire of their receiver away from the other wires and closer to the steering wheel. The supplied bolts can be shorter; if they are tightened all the way, they will cling to the fingers, so either replace them (bolts and not fingers), or do not tighten them completely and press them with braid. Among the shortcomings: it seemed to me that both sets of buttons are for the left hand, or I’m somehow wrong, in general, it would be possible to swap the designations of the keys, because they need to be tied to the balalaika.

Review No. 2: From the moment of order to receipt is 20 days, but this is due to our mail. According to tracking and upon arrival in the city, three days passed before the electronic notification, and if I had waited for the notification, it would have been at least a week. The buttons look flimsy, but everything is fine until I installed them. I recommend the seller and the product.

Review #3: Everything corresponds to the description. Thanks to the seller. I recommend. I connected it in 15 minutes, taught it, everything works... the impression of use is excellent.

Steering wheel radio control panel for Marsnaska car

Price: from 313.3 rub. (check price and discount)

Seller's reliability: excellent!

Delivery within Russia: free!

Customer reviews:

Review No. 1: Dispatch, delivery 25 days to Kiev, the track was tracked, but the remote control works well, it works when directly pointed at the radio, it doesn’t work a little to the side, it’s easy to program. Overall, I'm satisfied.

Review #2: The order took 3 weeks, Sochi. I didn't bend anything. Easy to set up using your original remote control. I put it on the steering wheel of a Lada Kalina. Thanks a lot.

Review No. 3: The parcel arrived by SDEK. It took a month to reach the Tomsk region. The remote control is working, set up all the buttons the first time. I haven’t checked the range, but I can get a signal from the steering wheel. Mystery radio. The seller responds to messages, so I recommend it.