Setting up an alarm with auto start Scher Khan Magicar 5

Sherkhan Logicar 4

1. Press and hold the second and third buttons of the remote control for 2 seconds until the Pro9 picture lights up.
2. Click the first key once. The key fob will go to the time setting menu. The numbers will flash on the display.
3. Use the first key to adjust the clock. Button 2 – for setting minutes.
4. Once installation is complete, hold down the second and third keys for two seconds. There will be an exit from regulation.

• Audi
• Brilliance
• Faw
• Ford
• Chevrolet
• Citroen
• Geely
• Haval
• Changan
• Chery
• Datsun
• Great Wall
• Hyundai
• Kia
• Lada
• Volkswagen
• Renault
• Nissan
• Toyota
• Honda
• Mitsubishi
• Opel
• Lifan
• Mazda
• Skoda
• Rest

Author of the material: Dumchenkov Mikhail

Did you like the material? Share with your friends:

Sherkhan Magikar 2

This instruction is universal and is suitable for Scher Khan 3, 5, 8 remote controls.

1. Turn on the key fob programming mode by pressing for two seconds. electric buttons II and III. Login will be confirmed by the Pro9 picture.
2. To go to setting the time, press the I button once. The numbers should flash.
3. Key I changes the hours, and II changes the minutes.
4. Pressing 2 s of buttons II and III will exit programming.

It happens that the remote control stops working: it opens and closes the doors, but there are no symbols on the display. The key fob only shows the time. What to do in such a situation? Reboot the car alarm and re-register the remote control into the system memory.

Setting the time on the remote control

Setting the time on the key fob is an important undertaking, without which it will be impossible to fully use the security system. In Scher-Khan Magicar 5, even a child can set the hours and minutes. To do this you need to do the following:

1. Press keys 2 and 3 simultaneously and hold them for 2 seconds. As a result of this action, a transition to the Sherkhan Magikar 5 alarm key fob programming mode occurs.
2. As soon as Pro9 appears on the display, go to the time settings menu. To do this, briefly press button 1 and the dial will automatically start flashing.
3. At this moment, use key 1 to set the hours (from 0 to 23).
4. Set the minutes by pressing button 2.
5. After completing the settings, the entered values ​​are saved. To do this, press keys 2 and 3 simultaneously for 2 seconds. After this, the dial will stop flashing and the device will exit the time setting mode.

How to set autorun time

Correctly setting the Sherkhan 5 Magikar time allows you to enable the useful engine autostart function. It will be in demand in winter, when you need to warm up the engine for a long time. Thanks to it, you can complete all the preparatory steps in advance and start moving at any convenient time.

Step-by-step instruction:

1. To set autorun, enter programming mode. To do this, press the combination of keys 1 and 2.
2. After this, activate the timer by clicking on buttons 2 and 4. If everything is done correctly, the Timer inscription will disappear from the display on the control panel.
3. At the next setting stage, press button 4 13 times. In this case, each click should be accompanied by a short sound signal.
4. In the menu that opens, select the desired engine autostart mode. If the vehicle owner does this using button 2, the engine will start working after 8 hours, 3 - 4 hours, 4 - 2 hours.
5. The set operating parameters of the signaling system are fixed by simultaneously pressing keys 2 and 4.
6. After this, the car engine is started and the selection of fixed time intervals (from 5 to 45 minutes) begins. To do this, press the combination of keys 1 and 2.
7. Then they click on 4 12 times and wait for the same number of beeps.
8. Enter the desired value (1 - 5 minutes, 2 - 15 minutes, 3 - 25 minutes, 4 - 45 minutes).
9. By pressing 1 and 2, autorun programming is completed.

On the keychain Sherkhan Magikar 7

The instructions allow you to set the clock not only on the Magicar 7 key fob, but also on 11,12, 10 Mini.

1. Setting the current time begins with entering the remote control programming mode. This is done by pressing for two seconds. keys I and III. Confirmation of actions - the inscription Pro9 and a tone signal from the remote control.
2. After successful completion of the first step, an automatic switch to the time setting occurs. The dial should flash.
3. Button I changes the clock readings.
4. II changes the minutes.
5. Exit the regulation mode by pressing for 2 seconds. buttons I and III.

On the keychain Sherkhan Magikar 7

The instructions allow you to set the clock not only on the Magicar 7 key fob, but also on 11,12, 10 Mini.

1. Setting the current time begins with entering the remote control programming mode. This is done by pressing for two seconds. keys I and III. Confirmation of actions - the inscription Pro9 and a tone signal from the remote control.
2. After successful completion of the first step, an automatic switch to the time setting occurs. The dial should flash.
3. Button I changes the clock readings.
4. II changes the minutes.
5. Exit the regulation mode by pressing for 2 seconds. buttons I and III.

Setting the time, autorun by time

timer start (A); turbo timer mode (B); passive activation of the system (C); automatic switching mode without pressing buttons (D); siren on (E); Shock detection sensor (F) is turned off; vibration alert is active in the key fob (G); door lock control after ignition start (H); open trunk lid (J); the engine is switched on in autostart mode (K); system state (L); open doors (M); field for displaying the clock, temperature and data during autostart (N); Valet (O) operating mode; working hazard warning lights or lights not turned off (P); shock sensor (Q) triggered; key fob battery indicator (R); signal level (S).

Since the alarm system has a timed autostart mode, when the car starts every day at a given time, for it to work, you must correctly set the time on the main key fob. The procedure required to set the time on the Sherkhan Magikar 5 alarm key fob:

1. Press buttons 2 and 3 for 2 seconds. The screen indication will change to something that looks like “Pro9” (this should actually show Prog, but due to the limitations of seven-segment screen elements, it appears that way).

2. Briefly press button 1 – the current time readings will start flashing, the key fob will give a single signal.

3. Press button 2 to set the hour, and use button 3 to enter minutes.

4. Press buttons 2 and 3 for two seconds and save the settings.

Timed autostart (of course, all necessary connections and settings of the system itself must be made in advance) is possible in two options. Either the car starts every day at a set time (for which the clock is set), or this happens every 2, 4, 8 hours from the moment the mode is activated and regardless of the clock setting. The type of timed autorun is set in the system settings, that is, several options cannot be activated at the same time.

To enable autorun on a 24-hour timer, you need to:

1. Press buttons 2 and 3 for 2 seconds.

2. After the inscription “Pro9” appears, briefly press button 2 (not 1, as for setting the current time. The readings of the previously set autostart time will begin to blink.

3. Use button 1 to set the hour, button 2 to set the minutes.

4. Press 2 and 3 again and save the timer values.

5. Press buttons 2 and 4 to turn on the TIMER indicator on the screen.

If you need to change the autorun time when the timer is already activated, you must first turn it off (similarly, by pressing 2+4), configure the timer time, then turn it back on.

If the alarm settings are set to start periodically, simply press buttons 2+4 to turn it on and off. After activating the periodic start mode for the first time, the engine will start after 2, 4 or 8 hours, depending on the settings of the central unit.

Video: SCHER-KHAN MAGICAR 5

Setting the clock on the Scher Khan key fob

Sometimes the time readings of the Scher Khan car alarm models Universe, Magicar, Logicar go astray. This happens for the following reasons.

• weak power supply. During operation, the battery gradually discharges, losing its capacity. The clock readings are off;
• recent battery change, after which the time is automatically reset;
• poor contact contact. Inspect the working connections, if necessary, bend them;
• manufacturing defects;
• short circuit caused by the remote control getting into water or other liquid.

You can set the clock on the anti-theft system key fob yourself by following simple instructions.

Scher khan logicar 4 how to set the clock | Watchmaker

page » Setting » Scher khan logicar 4 how to set the clock

In this article, we asked the wizard to answer the question: “Scher khan logicar 4 how to set the clock?”, as well as give useful recommendations on the topic. Read on to find out what came of it.

Setting the clock on the Scher Khan key fob

Sometimes the time readings of the Scher Khan car alarm models Universe, Magicar, Logicar go astray. This happens for the following reasons.

• weak power supply. During operation, the battery gradually discharges, losing its capacity. The clock readings are off;
• recent battery change, after which the time is automatically reset;
• poor contact contact. Inspect the working connections, if necessary, bend them;
• manufacturing defects;
• short circuit caused by the remote control getting into water or other liquid.

You can set the clock on the anti-theft system key fob yourself by following simple instructions.

Universal method

This scheme is suitable for Mobiscar 1, 2, as well as Mobicar A, B.

1. Enter settings by pressing for 2 seconds. buttons II and III. A symbol will appear on the Pro9 screen and the key fob will beep.
2. Press the I key once. The current time setting mode will turn on. The dial will start flashing. The remote control will sound.
3. Use the I button to change the hours.
4. Use key II to set the minutes.
5. Press II and III for 2 s and you will exit programming.

On the keychain Sherkhan Magikar 7

The instructions allow you to set the clock not only on the Magicar 7 key fob, but also on 11,12, 10 Mini.

1. Setting the current time begins with entering the remote control programming mode. This is done by pressing for two seconds. keys I and III. Confirmation of actions - the inscription Pro9 and a tone signal from the remote control.
2. After successful completion of the first step, an automatic switch to the time setting occurs. The dial should flash.
3. Button I changes the clock readings.
4. II changes the minutes.
5. Exit the regulation mode by pressing for 2 seconds. buttons I and III.

Setting the time on the Sherkhan 9 alarm remote control

Follow the procedure exactly and you can easily set the clock of the Scher Khan 9, 13, 14 anti-theft system.

1. To set the time, enter programming mode. Hold I and III. Press duration is two seconds. Picture on the keychain. Pro9 will appear on the screen and a remote beep will sound.
2. Switching to the time setting occurs automatically. The picture on the keychain depicting the dial will begin to blink.
3. Use the I key to set the hours.
4. II Set the minutes.
5. Press I and III for two seconds, the regulation will exit.

Sherkhan Magikar 2

This instruction is universal and is suitable for Scher Khan 3, 5, 8 remote controls.

1. Turn on the key fob programming mode by pressing for two seconds. electric buttons II and III. Login will be confirmed by the Pro9 picture.
2. To go to setting the time, press the I button once. The numbers should flash.
3. Key I changes the hours, and II changes the minutes.
4. Pressing 2 s of buttons II and III will exit programming.

It happens that the remote control stops working: it opens and closes the doors, but there are no symbols on the display. The key fob only shows the time. What to do in such a situation? Reboot the car alarm and re-register the remote control into the system memory.

Sherkhan Logicar 4

You can set the time on the remote alarm control key fob yourself by following these steps.

1. Press and hold the second and third buttons of the remote control for 2 seconds until the Pro9 picture lights up.
2. Click the first key once. The key fob will go to the time setting menu. The numbers will flash on the display.
3. Use the first key to adjust the clock. Button 2 – for setting minutes.
4. Once installation is complete, hold down the second and third keys for two seconds. There will be an exit from regulation.