Wiring diagram for heated seats Kalina

Universal

There are a large number of universal seat heating systems on the market, including for Kalina 2. At the moment, the most popular configuration is “Emelya”.
This is due to the excellent price/quality ratio, as well as high safety and availability in different regions. Compared to the standard set, the universal one is larger in size, but its characteristics are better. It heats up faster due to the use of slightly different technology in the design. As a rule, most motorists whose car does not have a heating system installed from the factory prefer the Emelya system. It fits well on virtually any make and model, making it truly universal.

How to install heated seats on Kalina yourself

heated seats Kalina or Grant
When carrying out work independently, it is necessary to carry out a number of specific actions in the following sequence

remove the seats by unscrewing the special plastic covers on both sides;
separate the back and seat by removing the bolts securing them;
in the lower area of the backrest, lift the upholstery and install a heating system in this place, also mount the elements directly on the seat itself;
Carefully place the trim in the same place and connect the connectors for the separate heated seats and backrests;
remove the white connector and connect it to the power supply on the gearshift lever;
be sure to install the special fuse included in the kit;
install buttons to turn the equipment on and off in a convenient place.

When installing, it is important to follow all instructions for the specific heating kit. For more reliable fastening, as well as ease of operation, it would be better to remove the seats from the car, although this is not a prerequisite

The installation steps are not at all complicated; doing them yourself will not be difficult; you only need basic skills that are easy to master. The result is worth it, because warm seats in the winter will provide a particularly comfortable environment inside the car.

source

Heated seats Lada Kalina 1

How to heat seats in Kalina Electric car seat
is a very useful thing that can give the cabin the most comfortable conditions. This is especially important in the winter, when low temperatures are raging outside, and the driver and passengers can enjoy the comfort and warmth inside the car.

In the modern car market there is a fairly large assortment of universal seat heating systems for the Lada Kalina car

, which differ in different configurations.

How to install heated seats on Kalina yourself

Tuning Kalina's interior The whole process involves several stages of work, which consist of installing heating elements and connecting their system to the car seats. It is better to purchase heated seats Kalina or Grant.
When carrying out the work yourself, it is necessary to carry out a number of specific actions in the following sequence

Connection diagram for seat heating buttons VAZ 2110

remove the seats by unscrewing the special plastic covers on both sides;
separate the back and seat by removing the bolts securing them;
in the lower area of the backrest, lift the upholstery and install a heating system in this place, also mount the elements directly on the seat itself;
Carefully place the trim in the same place and connect the connectors for the separate heated seats and backrests;
remove the white connector and connect it to the power supply on the gearshift lever;
be sure to install the special fuse included in the kit;
install buttons to turn the equipment on and off in a convenient place.

The option “Heated rear seats of a car” is no longer uncommon; it can be found in the list of equipment even for budget foreign cars. AvtoVAZ is constantly improving its LADA models, but the turn has not yet come to heating the rear sofa. Let's figure out how to equip your car with this useful function with your own hands.

Installation and connection of heated rear seats for all LADA cars (XRAY, Vesta, Largus, Granta, Kalina, Priora and Niva 4x4) is carried out in the same way. There are no fundamental differences. In this example, the modification process is shown on a Lada Priora car.

Why built-in heated seats are better

The first problem is that the quality of many capes leaves much to be desired. It is not uncommon for a cape to catch fire directly under a person sitting on it. The risk of getting burned is quite high, not to mention the fact that the clothes will probably be ruined.

The second problem is that the capes heat up differently. For some, the temperature reaches 40 degrees, and this adversely affects reproductive function in men.

The third problem lies in the fact that there is usually only one cigarette lighter socket in a car, therefore, it will only be possible to connect the heated driver’s seat, and, as a rule, there are also passengers in the car. You can, of course, use a splitter, but the current consumption will be too high, and the fuse in the splitter will not withstand it. In addition, when using capes and covers, extra wires appear in the interior, which can interfere with driving the car. Using covers on the rear seats of a car is out of the question due to the insufficient length of the electrical cable.

Main types of electric heating systems

As already mentioned, such systems differ in configuration, as well as in the time that may be required to install them.

. Some types of kits can be installed in a matter of seconds, while others can take about six hours.

All designs are divided into subgroups

depending on the following criteria:

How to make heated seats on a VAZ 2110 without contacting a service center

According to the type of heating element used

Depending on the area to be heated

Electrically heated seats only;
heated seat and back area.

Depending on location

easy installation on the surface of the covers;
more complex installation under the cover.

Depending on operating modes

a simple device with on and off buttons;
begins to work upon contact with a person;
a device that maintains temperature conditions at an automatic level, etc.

There are also two types of system designs

Standard heating

It is equipped with a reliable and safe design, which is quite suitable for long-term service. In this case, special threads are used that perform the heating function. Certain thermostats are built into the system. The buttons of such a device have self-locking properties. Standard equipment is designed to heat the seat and back area.

There is a wide variety of different universal heating systems

. One of the most common today is the Emelya set, which is of high quality. The elements of the kit are an order of magnitude larger in size than in standard equipment, but they also heat up faster. This will be one of the profitable options if the heating system is not installed by the manufacturer.

Car rear seat heating installation

Installing heated front seats

The article will consider the issue of heated seats of the Kalina 2 model
. After all, in winter, sitting in a warm car seat is more pleasant than sitting in a cool seat after the car has been parked on the street. It is for this reason that current cars include such an option as heating.

Where can I buy?

Nowadays there are a great variety of car accessories and auxiliary devices. There is a good selection of seat heating systems for the Lada Kalina. They differ only in the configuration.

It is possible to purchase heated seats for Kalina 2 not only in the company stores of the plant that produces cars of this brand. They are also available in the online store. And installation can be done at any service station for these vehicles.

Such heating is produced by Teplodom LLC in Russia

Technical specifications:

There is most often one mode, and turning on/off is not done automatically. This option is good because you don’t have to sit on a hot seat when it’s already warm in the car or when the driver doesn’t want the heating to be turned on. But there are installations with 2 modes.

It is usually built inside the seats.
Battery operated.

As a rule, the installation has a 1-year warranty, but lasts much longer without breakdowns.

How to independently install heating on a Lada Kalina?

Often, car enthusiasts decide to install such a device themselves, not trusting service station workers.

The heating installation work is not difficult. You can build it into the seats yourself. The main thing is to strictly follow the instructions included in the kit.

There are kits that can be installed very quickly. And with some you will have to tinker with from 2 to 6 hours.

Types of electric heating systems or type of heating elements 2:

carbon fiber,
heat-conducting threads.

There are also 2 different operating mode options:

heated seats only;
heated seat and backrest.

Heating installations are located either inside the seats (under the covers) or simply on top. Also, heating devices can be of two types:

with a standard operating principle,
with universal.

The standard heating is designed to heat the seat and back, has a reliable and safe design, suitable for long-term operation. The design uses threads that perform heating. The device contains special thermostats.

There are now a lot of systems with universal heating. The most common today is “Emelya”, which has the highest quality parameters. The parts of the kit are quite large in size compared to the standard device, and heating occurs much faster. That’s why many people prefer to purchase just such a heating system. It is more profitable, especially for the Lada Kalina model.

How to heat seats in Kalina
Electric car seat
is a very useful thing that can give the cabin the most comfortable conditions. This is especially important in the winter, when low temperatures are raging outside, and the driver and passengers can enjoy the comfort and warmth inside the car.

In the modern car market there is a fairly large assortment of universal seat heating systems for the Lada Kalina car

, which differ in different configurations.

Lada Kalina Hatchback 2011, 85 l. With. - other

Lada Kalina, 2006

Comments 35

Please tell me! Where is the diagnostic connector located? In your photo there is an empty space for the connector, and that’s exactly what I have. Or is there no connector at all, or did you move it? I've dug through everything on my viburnum, I can't find the connector, or is it not there at all?!

I did it myself according to the same scheme, but took power from the cigarette lighter, later I will remake it on a separate branch

Respect to the author!) An interesting idea is how to make only one butt-heater for the driver's side, it turns out that only one relay is required?

Do the buttons automatically turn off when they get too hot?

Hello.Please give me a link where I could buy seat heaters. I want to fit them in my Niva.

Cool! I have heating pads, I’ll probably do the same. Thanks for the detailed description!

In general, everything is fine, but the inclusion of the backlight and the on state is not clear. There are 5 contacts on the button.

Dear greetings to everyone, I agree the wiring on the cigarette lighter is bad, but for 3 months now my heating connected through the cigarette lighter makes me happy, pah pah pah!

The diagram shows that from pin 2 there is a wire going to pin 87, but there are two wires + and - and. I can’t figure out what’s wrong, or am I mistaken, or has no one noticed?

everything is clear and understandable, I’ll make trouble for myself, just not the Emelya, but the factory ones, and I won’t disassemble the gray hair, but stupidly put it under covers and sew it on

guys)))) why are you doing this through the cigarette lighter? Of course, I understand everything, but basically the wiring burns due to voltage, the cigarette lighter has thin wiring, the load is large, for me it keeps the phone charging and the backlight at maximum ((((I also plan to install heating on my viburnum, I just know how to disassemble the seats, I think I won’t take the Emelya, but I’ll take the factory one))) thank God we have a lot of this in Togliatti)))) and I think I’ll do everything like from the factory, I’ll probably have to pull it directly from the battery)))

exactly what I was looking for, everything in detail, thanks for the post)

And in general it’s a TEST! Great job! Ugh ugh ugh so that it works without problems.

I’ve been studying this topic for a while now and I’m amazed. Why doesn't anyone install fuses? Of course, I understand that it’s in the mounting block for the cigarette lighter, but it’s better to put one more just before the heater (4A*12V=48W) + on top of that, I would put another relay in this circuit for the plus after the cigarette lighter block, and the manager would apply it to it would be from the ignition switch. Otherwise, we had a case. The man had a luxury Viburnum, drove the car into the garage in the evening, and it BURNED, along with the garage! The relay is stuck. I myself, when OKA had a periodic low beam relay, stuck. The probability of two relays sticking at once is much less than one. So you need to BE INSURED! Just in case.

Can you draw a diagram?)))based even on this one?

good report. I’ll have to stir it up myself, otherwise I’m tired of poking at the cigarette lighter.

source

Procedure

Initially, you need to remove the seats, depending on the make and model, the process and tools may vary. Next, you need to separate the backrest and seat, since the system will be installed alternately.

After this, you need to lift the lower part of the trim on the back of the seat and install a heating system there. In the same way, install the system on the seat itself.
After this, it is necessary to return the casing to its original place as carefully as possible, without damaging the appearance. Once the casing is in place, you need to connect the system connectors to each other.
On the gearshift lever, connect the white wire to the power supply, which must first be removed. Absolutely all kits include a fuse; its installation is mandatory.
Determine the most convenient and ergonomic location for installing the heating system control buttons.
After all the above steps are completed, the backrest and seat are placed back in their place and carefully secured.

Connecting heating elements

Every self-respecting manufacturer completes the installation kit with instructions for connecting the unit to the vehicle’s on-board network. If this stage causes certain difficulties or you are unsure of your abilities, then it is better to immediately contact electrical specialists.

For those who are confident in their own abilities, the following recommendations will be useful:

using a multimeter, you should detect the 12 V power supply, backlight and ignition circuits;
connect the positive wire of the thermal relay to the ignition switch connector, where power appears only after turning the key;
connect the supply wire through a fuse to the positive terminal of the battery;
connect the negative wire to ground;
connect the button illumination wires to the cigarette lighter contacts;
solder and insulate all connections;
check the operation of the system.

Power supply or how to connect the heated front seats on the Lada Granta correctly

The cost of installation work at an unofficial service station is at least 2,500 rubles. For this money, already purchased heating elements will be installed in the car seat and the circuit will be connected according to the manual. All that remains is to make an anti-freeze product according to a home recipe and hit the road. This is for the quick ones. Painful owners will probably not like the electrical part of the integration.

Disadvantages of the standard kit

The instructions indicate how to install heated seats on the Grant and connect it to the on-board network. According to what is written, the electrics connect and function like this:

The permanent plus is taken from the hazard warning button.
The ground is connected to the bracket for fastening the standard wires of the negative pole.
The standard fuse is replaced with a more powerful one.
The heating is turned on/off using the buttons directly.

Only one function is correctly implemented - turning off the heating when the ignition is turned off. Otherwise, the connection scheme is not entirely successful:

The positive wire that goes to the emergency light is thin and will probably work at the limit.
The contact group of buttons operates in a dangerous mode, since it is not intended for power loads.

Competent connection diagram

An unfortunate result of the standard connection algorithm is a melted fuse. Such a reaction indicates that the circuit is operating at its limit. An alternative scheme for connecting heated seats will help to avoid this. It involves the use of two four-pin relays and powering them from switch K4, which supplies the output “+” after turning on the ignition.

Additional items

It is advisable to carry out installation work after purchasing an additional mounting block of reduced size. You will also need regular contacts for connecting two relays and two Lyra contact elements linking a 10A fuse. We also add additional wires with a cross-section of 4 and 1.5 mm2 to the shopping list.

Search "+"

So, in order to connect the heated front seats on the Grant, you need to find out the number of the output plus of relay K4, which appears after turning on the ignition. This can be either the 87th or the 30th contact.

Usually this is contact element No. 30, but it doesn’t hurt to make sure once again. We remove the relay and diagnose. The test is carried out by connecting a 12V lamp to the 30th contact of the mounting block and ground. After activating the ignition, the lamp should light up.

Connecting elements

It is convenient to disassemble the connection map of the key components of the circuit in the figure. The sequence of actions when assembling the chain is as follows:

Pull out the “+” terminal, found during the K4 relay test, and connect two wires to it: one (4 mm2) - to the fuse and then to the 87th contact, the second - the control plus from the heating button (pin No. 1). Make a jumper and integrate it back.
On the “+” route to the seat heating relay, install a 10A fuse by integrating the “Lira” contacts.
At the second end of the received “+”, make branches for the second switch and control button, connect them to the 87th and 1st contacts.
Make two ground wires with jumpers that will be attached to the 85th, A and C terminals.
Route the control wiring and the backlight wire from the buttons to the mounting block. Connect 2nd contacts to 86th; B – with fuse fastening element F9 or F10.
Connect your “+” heating elements to the 30th contacts of each relay.

It is convenient to make jumpers or branches using male-female contact pairs. It is better to avoid “twists” by connecting the wires directly in the block and making bends.

Do-it-yourself heated seats on a Lada Priora: video instructions

For installation you will need: standard heated seats, electrical wires, button block

heating control, four-contact relay, 15 A fuse, female and male wire terminals, corrugated pipe for electrical wiring, double-sided tape.

Removing Lada Priora seats

To remove the seats, you will need an 8 mm socket wrench or a special star socket - depending on the year of manufacture of the car. To install electrical wiring, you need to remove the decorative trim between the seats.

Using a flat-head screwdriver, bend the corners on the seat upholstery and pull out the plastic plugs. Now you can freely move the casing to the side.

Installation

kit “heated front seats”, for example, from a VAZ 2110 or Priora (article 2170-6513010-03);
seat heating control buttons (for example, those from the VAZ 2110 have article number 2110-3709710);
relay 4-pin (1119-3747210-10);
wires.

Installation of heating mats

Remove the rear sofa and rear seat backs (instructions for XRAY, Vesta, Granta/Kalina).
I removed the trim from the seats (held on by rings).
Insert heating into the backrest and sofa.
Install the seat trim in the reverse order.

Installing buttons for heated rear seats

in a place convenient for you. For example, in a floor tunnel.

Selecting heated seats

In order to choose heated seats, you need to decide what kind of heating you need. There are several types of seat heating for Lada Priora: Cover, Standard heating, Emelya heating

Heated seats from the cigarette lighter (cape)

This type of heating has a wide area of application and is quite easy to install. To install heated seats from the cigarette lighter, you do not need any auto electrician skills. To install such heating, you just need to insert the heating plug into the cigarette lighter and select the heating position. It should be noted that the reliability of such heating leaves much to be desired. Filaments are used as a heating element, but since the cape is poorly attached to the seat and is often subject to creases, which leads to the breakage of the filament and, consequently, failure of the entire heating.

Heated seats standard

The standard heating for Lada Priora is a very reliable device that can be bought at any auto parts store at a price of 1000 rubles. Standard heating has only one heating position and does not regulate the heating temperature, i.e. The seat will heat up until you turn it off. This is its only drawback. The advantage of this heating is that there is no need to use additional intermediate relays to unload the contacts. Since the relay itself is already built into the button. The standard heating has heating elements for the seat and lower back.

Heated seats Emelya

Emelya's heated seats have proven themselves quite well on the market. The cost of such a heating kit is not cheap, starting from 2000 rubles. This heating is installed in the same way as standard heating. However, a significant difference from standard heating is the ability to regulate seat heating. But it is also worth noting that installing the seat heating button in the standard place will be difficult; you will have to cut out and trim the standard place. This type of heating has heating elements for the seat and lower back.

Design of the LADA Kalina cooling system

Cooling system: 1 — expansion tank; 2 — radiator outlet hose; 3 - inlet hose; 4 - radiator; 5 — steam exhaust hose; b — radiator supply hose; 7 — electric fan; 8 — electric fan casing; 9 — coolant temperature sensor; 10 — coolant temperature indicator sensor; 11 — throttle assembly; 12 — bracket for the coolant pump pipe; 13 — coolant pump; 14 — coolant pump pipe; 15 — heater radiator supply hose; 16 — heater radiator outlet hose; 17 — exhaust pipe; 18 — coolant pump pipe hose; 19 — thermostat housing

Expansion tank. Coolant is poured into the system through the expansion tank. It is made of translucent polyethylene, which allows you to visually monitor the liquid level. To do this, the marks “MAX” and “MIN” are marked on the wall of the tank. In the upper part of the tank there is a pipe for connecting to the radiator steam exhaust hose, in the lower part there is a pipe for connecting to the inlet hose. Expansion tank viburnum

Expansion tank cap with valves. The tightness of the system is ensured by the inlet and outlet valves in the expansion tank cap. The exhaust valve maintains increased (compared to atmospheric) pressure in the system on a hot engine (due to this, the boiling point of the liquid becomes higher, steam losses are reduced}. It begins to open at a pressure of at least 1.1 bar. The intake valve opens when the pressure drops to system relative to atmospheric pressure by 0.03-0.13 bar (on a cooling engine).Expansion tank cap with valves

The coolant pump is a vane, centrifugal type, driven from the crankshaft pulley by a timing belt. The pump housing is aluminum. The roller rotates in a double-row bearing. The bearing is lubricated for its entire service life. The outer ring of the bearing is locked with a screw. A toothed pulley is pressed onto the front end of the roller, and an impeller is pressed onto the rear end. A thrust ring made of a graphite-containing composition is pressed to the end of the impeller, behind which there is an oil seal. The pump housing has a control hole to detect fluid leakage when the pump fails. It is recommended to replace the pump as an assembly. The redistribution of liquid flows is controlled by a thermostat. Coolant pump Kalina

The cooling system consists of two so-called circulation circles:

The movement of liquid through the cooling jacket and radiator forms a large circulation circle.
The movement of liquid through the engine cooling jacket, bypassing the radiator, is a small circle of circulation.

The cooling system also includes a heater radiator and a throttle body heating unit. Liquid circulates through them constantly and does not depend on the position of the thermostat valves.

Thermostat. It has a solid temperature-sensitive element and two valves that redistribute the flow of coolant. On a cold engine, the main thermostat valve blocks the flow of fluid from the radiator and the fluid circulates only in a small circle, bypassing the radiator. At a temperature of (85±2) °C, the thermostat valves begin to move, allowing liquid flow into the radiator and closing the bypass channel. At a temperature of about (100±2) °C, the main valve opens completely and the bypass valve closes. Almost all the fluid circulates in a large circle through the engine radiator. Thermostat viburnum

Coolant temperature sensor. To monitor the coolant temperature, a sensor is screwed into the engine cylinder head, connected to the temperature indicator in the instrument cluster. In the outlet pipe, next to the thermostat housing, there is a coolant temperature sensor that provides information to the controller. Coolant temperature sensor viburnum

The heater radiator is built into the engine cooling system and is designed to heat the passenger compartment by circulating hot coolant through it.

The radiator consists of two vertical plastic tanks (the left one with a baffle) and two horizontal rows of round aluminum tubes passing through the cooling plates. The tubes are connected to the tanks through a rubber gasket. The liquid is supplied through the upper pipe and discharged through the lower. Next to the inlet pipe there is a thin pipe for the steam removal hose. The radiator has a casing with an electric fan. There is a drain plug at the bottom of the right tank. radiator viburnum The fan maintains the thermal operating mode of the engine and is switched on via a relay based on a signal from the controller.

Main types of electric heating systems

As already mentioned, such systems differ in configuration, as well as in the time that may be required to install them.

. Some types of kits can be installed in a matter of seconds, while others can take about six hours.

All designs are divided into subgroups

depending on the following criteria:

According to the type of heating element used

Depending on the area to be heated

Electrically heated seats only;
heated seat and back area.

Depending on location

easy installation on the surface of the covers;
more complex installation under the cover.

Depending on operating modes

a simple device with on and off buttons;
begins to work upon contact with a person;
a device that maintains temperature conditions at an automatic level, etc.

There are also two types of system designs

Standard heating

There is a wide variety of different universal heating systems

DIY seat heating installation

Before you start installing it yourself, you should pay attention to the operating mode switch buttons included in the kit, or more precisely to their size and method of fastening. The button from the kit may not fit into the standard place on the panel, and you may have to either purchase the required number of buttons suitable for a particular car, or choose a different location for installation. Options for buttons and installation locations can be seen in the photo:

The installation of seat heating begins with the installation of heating elements under the seat trim. This is the most difficult stage of the work, since you will have to completely remove the casing in order to properly install the heaters. For an untrained driver, one seat usually takes about four hours. Installing heating elements in the rear seats takes about the same time.

Connecting heated seats, as a rule, does not cause any special problems. The diagram provided by the manufacturer is quite detailed and understandable even for beginners.

One kit allows you to install heated seats for the driver and front passenger. If you also need heated rear seats, you will have to buy another set. The connection diagram will remain the same, i.e. Installation will not cause any additional difficulties.

Dear customers, in order to avoid mistakes when sending the electric seat heating kit 1118-6513010 with wires and buttons to the VAZ 1117/1118/1119, in the “Comment” line indicate your car model, equipment, year of manufacture.

When you have to get behind the wheel of a Lada Kalina in severe cold, and feel the cold seat on your back and because it’s lower, you involuntarily have to think about the fact that it wouldn’t hurt to have heated seats in the car. The fact is that the standard heated seats on the VAZ 1117/1118/1119 are found only in the luxury version of the last years of production, and in all other cars of this series heating is not provided. However, you shouldn’t despair, because anyone can do independent repairs and connect heating.

Most modern cars are equipped with many systems that provide comfort to the driver and passenger, one of which is heated seats. It is controlled using a block, looks attractive, modern, not only fits beautifully into the interior, but is also very easy to use.

Despite the fact that seat heating is a relatively new option on the bells and whistles market, this did not stop it from gaining global recognition among all motorists in the world in such a short period of time. Thanks to heated seats, the car driver can get rid of the unpleasant sensations that accompany him every time he gets into a “cold” car.

Selecting a heating kit for installation

The assortment presented in stores is wide enough so that every customer can choose the appropriate kit for installation with their own hands. These are mainly products from German, Russian and Chinese manufacturers. As practice shows, German kits (for example, WEACO) are the most reliable; their only drawback is their high price. But they are absolutely universal, they can be used in any car, both in the front seats and in the rear seats. This heating has several degrees of protection against overheating and two operating modes.

As an alternative to German products, domestic production kits and Autoterm have proven themselves well. Their products are not inferior to German ones in terms of reliability, and their consumer qualities are also quite high. All models of built-in seat heating are protected from overheating by means of a thermal relay; they use reinforced cable as a heating element. Some models have an automatic shutdown feature when overheating.

Wiring diagram for seat heating Kalina

It’s hard to imagine a modern car without all sorts of little things designed to make the trip as pleasant as possible. One such addition is heated seats. Sitting in a cold car seat when it’s thirty degrees below zero outside is not particularly pleasant; the only thing worse than sitting in a chair upholstered in leather. Meanwhile, many car owners are forced to do this every winter. The solution to the problem may be to install heated seats yourself.

In car dealerships you can find capes or covers with heating elements, as well as built-in heated seats. The first two options do not require complex installation and are usually affordable, while the latter poses a lot of difficulties in installing. You can, of course, contact a workshop where they will do the work quickly and efficiently, but the cost of the services will not please anyone. At first glance, the option with a cape or cover seems to be the most preferable:

low cost;
ease of connection,

however, this heating method is not without its flaws.

How to connect seat heating on a Kalina

(this malfunction is most likely on LADA KALINA NEW produced in 2013 with heated seats produced by Teplodom LLC)

1. Disconnect the seat heater from the vehicle’s on-board power supply and connect a device that measures the circuit resistance (multimeter). A working heating element must have a circuit resistance according to the design documentation ≤ 4 Ohm.

2. If the device shows an open circuit, then turn off the seat back heater and install a jumper (“crocodile clip”) instead.

3. If the device also shows an open circuit, then it is necessary to inspect the thermal relay for external damage. The arrow indicates the location of the thermal relay.

4. Partially remove the seat cushion upholstery.

5. Release the heater outlet.

6. By pulling out the outlet, bend the pillow heater and remove the protective layer to open access to the thermal relay.

7. Remove the protective tube from the thermal relay and, if there is no visible damage, use the second “crocodile” to bridge its contacts.

If there is a circuit (resistance ≤ 8 Ohm), record “thermal relay malfunction”. If the device shows an open circuit, then the heater is faulty.

(Seat heater manufactured by Teplodom LLC)

1. On a damaged seat, the burnt location of the seat upholstery is visually determined

2. In the burnout zone, the number of wires of the heating element is determined.

3. Distinctive feature of the heating element used:

- six copper wires with a cord (thread) in a fluoroplastic sheath - see photo 2;

- nineteen copper wires in a fluoroplastic sheath - see photo 3.

Connection

Rear seat heating connection diagram:

It is better to take contact “B” from a protected high-current circuit with a fuse. Contacts “A” and “C” can be found in the ERA-GLONASS lighting lamp, in the ISO radio or cigarette lighter connector. Before starting the connection, do not forget to disconnect the negative terminal of the battery.

Installation and connection of heated rear seats on a Lada Vesta on video in several episodes:

Let us remind you that we previously told you how to connect heated windows/mirrors to an additional alarm channel on Lada Vesta and XRAY, as well as how to turn on the heated windshield through a separate button.

Found an error? Select it and press Ctrl+Enter..

Today I finally decided to equip my car with heated seats, because summer is ending and winter is coming))), we need to prepare the sled in the summer, as popular wisdom says.. So, what do we need for this:

1. Heating pad plugged into the cigarette lighter 2 pcs. 2. Relay 90.3747 (4 pin) 2 pcs. 3. Block for relay 2 pcs. 4. Heating button VAZ 2114 2 pcs. 5. Block for buttons 2 pcs. 6. Connector to the heater (you can use the cigarette lighter socket) 7. Terminals, wires, insulation

Tools: knife, wire cutters, pliers, tester (multimeter)

For ease of operation, you can remove the front seats, but I didn’t. did this. Remove the left and right protective shields:

Summary

The technology for installing heated front seats on the Lada Granta consists of two stages: installing heating elements under the factory seat covers and connecting them to the on-board electrical network. The proposed electrical circuit organization scheme raises doubts.

The manufacturer of the branded kit suggests connecting the heaters directly to the buttons, and powering them from the alarm control button. Since the circuit is quite loaded, it is better to organize the heating power through two relays with a separate fuse. It is also advisable to replace the buttons - they do not indicate the operating mode.

Recommendations

When installing most heated seat systems, it is absolutely not necessary to remove the seats. The installation can be done this way. However, to ensure maximum comfort for the specialist, it is recommended to remove the seats. In addition, some models require the removal of seats, since the specific design does not allow them to be properly installed in any other way.

In general, installation is not a difficult process if you select an average, popular system model on the market. To carry out such work, it is enough to acquire basic skills and abilities, knowledge about the structure of a specific type of system, its functioning.

If the system is quite complex, it is recommended not to install it yourself. Otherwise, there is a high risk of connecting something wrong, as a result of which half or the entire structure will not work.