The bumper is the part that needs replacing most often. The fact is that it is often damaged in an accident, which requires repair and painting work. Naturally, it is not always necessary to contact specialized repair organizations to carry them out, since general skills are quite sufficient to perform such work. That is why every owner of a car of this brand needs to know how to remove the bumper on Kalina.
In addition, replacing the front bumper of a Kalina car may be required in conditions of remoteness from populated areas and, accordingly. In this case, other than replacing the failed unit yourself, there is no way to perform this repair. Also, dismantling the shock absorber may be necessary during tuning.
Tools required for dismantling
Replacing Klin bumpers is easy to handle when the right tools are used. These include:
- wrenches 8 and 10 (wrench heads);
- Phillips screwdriver, both long and short;
- small ratchet;
- wrench and head 13, used for unscrewing the shock absorber reinforcement beam when removing the headlight.
This set of tools must be prepared in advance so as not to select it as the work progresses. In addition, using any other “suitable” tool is highly undesirable, since in this case you can damage the body of the car itself and the damper. As a result, you will have to spend extra money because of such a trifle.
Features of dismantling
Before moving on to the question of how to remove the front bumper of the Lada Kalina, you need to do some preparatory work. The dismantling procedure is carried out in a viewing hole or using a lift, since many of the fixing elements are located below. If this is not possible, you will need to unscrew the bolts blindly. An alternative is to position yourself on the ground to visualize the fastening points.
We recommend performing the activities with a partner. An assistant will be able to hold one part while you unscrew the fasteners from the Kalina front bumper. Independent actions do not guarantee the quality and safety of the process.
For the procedure you will need:
- Extension.
- Screwdrivers - Phillips head and standard version.
- Special head for 8.
- Key for 10.
- Drive with an additional ratchet.
Today, the manufacturer supplies the market with two modifications of Kalina vehicles. They differ from each other in clamps. Therefore, there are some differences in the order of dismantling the part.
Kalina front bumper
The body design of the Lada Kalina car has specific features that require the mandatory removal of the damper even when simply replacing the headlights. This is due to the fact that the bracket mount is attached here in such a way that it covers the entire area in the shock absorber area, thereby complicating access to other structural elements of the car.
As a result, replacing the Lada Kalina bumper is far from the only reason for its dismantling. The bumper of this model car is made of plastic, so when working with it, extreme care must be taken to avoid damaging it.
Remember that before starting work, it is imperative to disconnect the battery terminal in order to avoid electric shock.
Features of dismantling the bumper of the new Kalina
Removing the front bumper of Kalina 2 has its own characteristics. The fact is that it is extremely precisely adjusted to its location and therefore dismantling it without damaging the plastic elements of the structure is quite difficult. To prevent this from happening, it is necessary to study in advance the design of the bumper, as well as its attachment points.
How to remove the front bumper of Lada Kalina. DIY bumper replacement
Regardless of the year of manufacture of the car, as well as the driving experience of the car owner, sooner or later there will be a need to remove or replace the front bumper.
Unfortunately, unpleasant moments happen in life when either you inadvertently damage your bumper, or someone else does it for you for the same reason. Then the logical question arises of removing the bumper for repair or complete replacement. This work is not anything complicated, however, without knowing the subtleties, you can further damage the fragile plastic bumper completely, ruining it beyond repair. In this article I will tell you how to remove the front bumper of a Lada Kalina with your own hands quickly and efficiently.
The Kalina bumper, like most modern bumpers, is made of plastic and is attached to the body with screws and self-tapping screws. The difficulty is that some screws are very well hidden, so if you miss one during dismantling, you can break something off. In order to remove the front bumper of a Lada Kalina you will need no more than 30-40 minutes, if you have an assistant, the work will go much faster and easier, an extra pair of hands never hurt anyone
